Clash Verge Rev on Windows 11: Beginner Install and Setup Guide

Prepare Windows 11 before installing

Clash Verge Rev is a graphical client for managing proxy profiles and a compatible Clash-family core, commonly mihomo. The client provides the interface; the core reads the active configuration, connects to proxy servers, and applies routing rules. Installing the app alone does not provide a working proxy: you also need a valid configuration or subscription from a provider, and at least one usable proxy in that profile.

Before downloading, check that Windows Update has completed any pending restart and confirm whether your PC runs a 64-bit version of Windows. Most current Windows 11 PCs are x64, but a device with an ARM processor may need an ARM64 build if one is offered. Choose the package specifically labeled for Windows and your system architecture on the client downloads page. Package names and available formats can change, so use the current listing rather than an old installer saved from another site.

• Use a trusted download source and avoid repackaged installers, file-sharing links, or “one-click config” bundles from unknown publishers.
• Keep your provider’s subscription URL or configuration file available. A subscription URL can contain an access token, so do not post it in a public forum or send an unredacted screenshot.
• If another VPN, proxy client, or traffic-capture tool is already running, note its current state. Two apps may compete to control Windows proxy settings, DNS, routes, or a virtual network adapter.

Download and install Clash Verge Rev

Open the Windows download section and select the package that matches your PC. If the listing offers an installer and a portable archive, the installer is usually the simplest choice for a first setup. A portable build may be useful when you cannot install software normally, but its files and settings may need more deliberate management. Do not rename an archive and assume it has been installed; extract it as directed by the package instructions.

1. Download the Windows package and wait for the browser to finish. If the download is blocked, review the browser’s warning and confirm that the file came from the trusted source you intended to use.
2. Open the downloaded installer from File Explorer. If Windows displays a User Account Control prompt, check the publisher and requested action before approving it. An installer may request permission to place files or register components; do not approve an unexpected prompt from an unknown publisher.
3. Follow the installer screens and keep the default destination unless you have a reason to change it. Avoid installing into a folder that is routinely deleted or synchronized in a way that could move application files.
4. When setup finishes, launch Clash Verge Rev from the Start menu. If Windows asks whether the app may communicate on private or public networks, do not enable network access automatically. Review the request and allow only what is appropriate for your use and network policy.

Windows may show a Microsoft Defender SmartScreen warning, especially for a new or infrequently downloaded application. A warning is not proof that a file is malicious, but it is a reason to verify the source, filename, and publisher before proceeding. If those details are unclear, cancel the launch and download the package again from the trusted listing. Do not disable Defender or lower system-wide security settings just to make an installer run.

After the app opens, check its About or version information screen if available. This helps distinguish a client launch problem from a later configuration or core problem. The client and its core are separate components: if the interface opens but a configuration fails to start, installing the app again may not address the actual cause.

Import a subscription or configuration

Once the interface is open, add a profile using the import option provided by the client. Button labels and panel locations can vary between releases, but the task is the same: add a provider-issued subscription URL, import a supported local configuration file, or enter a profile through another method explicitly documented by the provider. A profile is not the same thing as a single proxy address; it may contain proxy definitions, policy groups, routing rules, DNS settings, and other core options.

Add and update a subscription

1. In the profile or configuration area, choose the option for adding a remote subscription. Paste the complete URL supplied by your provider, including its scheme and any required path or parameters. Do not add spaces or remove query text.
2. Give the profile a recognizable name, such as the provider or account label. Avoid putting a password, payment information, or full access token in the display name.
3. Save the profile, then use its update or refresh action to retrieve the configuration. If the provider requires a user-agent, authentication, or a particular format, follow its instructions rather than guessing.
4. Select the imported profile as the active configuration. Wait for the client to finish parsing it and check for a success state or an error message before testing a connection.

If you have a local YAML file, use the local-file import option and select the file itself. Changing a file extension does not convert its contents: a list of proxy entries, a full Clash configuration, and a set of URI links are different kinds of data. A file that opens in a text editor can still be incomplete or unsupported by the active core. If a provider supplies a specific Clash or mihomo configuration, use that version and do not hand-edit a subscription file unless you understand how updates affect local changes.

Keep the subscription URL private. If you need help, share the error text and redact the URL, tokens, server addresses, usernames, passwords, and any other account-specific fields. A screenshot of the profile list can reveal more than expected, so inspect it before sharing.

Make a first connection and verify it

Begin with the simplest supported path: select the imported profile, choose a proxy or policy group that has a usable option, and enable the client’s system proxy. The exact wording of the control can differ. A profile may load successfully while its proxy group still has no selected node, so inspect the group selection instead of assuming that importing a profile automatically starts a connection.

1. Open the profile’s proxy or group view and select an available node in the provider’s main selection group. If the group is named differently in your profile, use its actual name.
2. Choose Rule mode for normal rules-based routing, unless your provider’s setup instructions specify another mode. In Rule mode, the destination and configured rules determine whether a connection uses a proxy, connects directly, or is rejected.
3. Turn on the system proxy from the client’s controls. If Windows asks for permission to change settings, review the prompt. Do not also enable a second proxy application while testing.
4. Open a browser and visit a site that should use the selected route. Check the client’s connection list or logs for the destination, matched rule or policy, and selected outbound. A successful latency check alone does not confirm that a browser request followed the expected route.
5. When the test is complete, confirm that sites intended to connect directly still behave as expected. Return to the client and turn off the system proxy when you no longer need it, especially before switching to another VPN or network tool.

System proxy settings are intended for applications that follow Windows proxy configuration. They do not guarantee capture of every desktop application, command-line tool, game, or service. If a browser test works but a specific app connects directly, first check whether that app supports the system proxy. Consider TUN only after the profile and ordinary proxy path work, and only if you understand the required permissions and possible route conflicts.

Fix common installation and launch problems

Diagnose the stage where the problem occurs. “The installer will not open,” “the client opens but the core fails,” and “the client connects but a site does not load” point to different causes. Record the exact error, the action that triggered it, and whether the issue started after a Windows update or a change to another network tool. Avoid repeatedly reinstalling the client before checking the message and the active profile.

Common Windows 11 symptoms

• The installer is blocked or cannot be verified: Confirm the download source and package architecture. Check the file’s name and publisher information, then download it again if the file is incomplete. Do not bypass a security warning when the source cannot be confirmed, and do not turn off Microsoft Defender as a workaround.
• The app appears to do nothing: Check the taskbar notification area for a minimized client, then open Task Manager and look for a running process. If it starts and exits, restart Windows and launch the app once more. Check Windows Security’s protection history for a blocked file and review any error details before changing security settings.
• The interface opens, but the core or profile fails: Confirm which profile is active, refresh the subscription, and inspect the error for a YAML parsing problem, unsupported option, or missing policy group. A client update does not necessarily repair a provider’s invalid configuration. Ask the provider for a supported configuration if the profile stopped working after a core change.
• The client says a port is already in use: Another proxy client or core may already be listening on the configured local port. Close the other client or use a different port only if you can update the relevant settings consistently. Do not terminate an unfamiliar process without identifying it.
• The node test succeeds but websites fail: Check the selected group, operating mode, system-proxy state, DNS behavior, and the connection log for the actual website request. The test target may be reachable while the destination site is not, or a rule may send the browser request to a different policy.
• Windows shows no proxy after the app exits: Reopen the client and inspect its system-proxy control. If proxy settings remain enabled after the client closes, disable them from the client when possible, or review Windows Settings under Network & internet > Proxy. Remove only values you recognize as belonging to this client; preserve settings managed by your workplace, school, or another approved tool.

For a controlled retry, close Clash Verge Rev, disconnect other proxy or VPN tools that you are allowed to pause, restart Windows, and launch the client again. Test with one profile and one selected node, using the system proxy rather than TUN. Change one setting at a time and repeat the same test so the result is meaningful. If a managed-device policy blocks installation or proxy changes, contact the administrator instead of trying to work around that policy.

If the issue remains, gather the client version, Windows version, package type, the exact error text, and the steps that reproduce it. Redact subscription URLs, tokens, credentials, and private server details from logs or screenshots. Once the basic route works reliably, you can explore advanced options such as TUN or custom DNS as separate, reversible changes.